ENCY Korea: Simultaneous 5-Axis CAM Showcase in Aluminum

Affordable simultaneous 5-axis CAM from the ENCY Korea office
ENCY Korea highlights a real 5-axis machining demo of an aluminum showcase part programmed with ENCY CAM. The reel opens with the spindle sweeping the top of the blank under heavy flood coolant, and closes on a beauty shot of the finished piece — an intricate spiral pocket pattern on a mirror-polished aluminum block.

Simultaneous 5-axis on a trunnion setup
The part is held in a precision vise (Max. 100Nm clamping, HRC < 40) mounted on the machine's rotary trunnion table, and the roughing and finishing passes exercise full 5-axis simultaneous motion — the geometry, chamfers, and pocket floor are all cleaned up without re-fixturing.

The pitch: 5-axis CAM at 20 million KRW
The overlay message on the reel asks "Simultaneous 5-axis CAM for 20 million won — for real?" and answers "ENCY CAM makes it possible." At roughly USD 14,500, it's positioned as an accessible entry point into simultaneous 5-axis CAM for Korean job shops and mold makers. Contact via ENCY Korea: 010 9181 9077.